Epoxy Paint Manufacturers
Epoxy is one of the most misunderstood coatings in the industrial finishing world. It is often dismissed as a niche product when it’s actually one of the most versatile protective systems available.
Black Country Paints is a UK epoxy paint manufacturer. We produce two-pack epoxy coatings for floors, metal structures, marine applications, pool linings and general industrial use from our Wolverhampton facility.
Every product is mixed in-house. We use virgin-grade raw materials, and our team can help you choose the right epoxy system for your substrate and environment. Rather than leaving you to work it out from a datasheet alone.
Free Delivery
Across the whole of the UK
10,000 + Colours
Mixed to order
MSDS/TDS Available
Contact us for spec documents
Fast Turnaround
1 - 3 Days from order
Bulk Order Discounts
On a wide range of our paints
Epoxy Paint Suppliers
BC Paints are direct epoxy paint suppliers. We work with customers who’ve often already tried an off-the-shelf product and found it didn’t hold up the way they expected.
Epoxy coatings perform exceptionally well when they’re correctly specified and properly applied. They perform significantly less well when they’re not. This is where buying from the manufacturer rather than a general distributor makes a real difference.
We supply two-pack epoxy systems to contractors, boatyards and industrial facilities across the UK. Our products cover a wide range of substrates. We cater to many different end-use environments.
Epoxy coating systems we manufacture and supply:
- Two-pack epoxy floor paint for warehouses and commercial premises
- Epoxy primer for steel and structural metalwork
- Solvent-free epoxy floor paint for enclosed or ventilation-restricted environments
- Two-pack epoxy pool coatings for concrete swimming pools
- Epoxy anti-corrosive primers for marine and offshore applications
- Zinc-rich epoxy primers for maximum corrosion protection on steel
- Two Pack Epoxy MIO (micaceous iron oxide) an intermediate coat between an anti-corrosive primer and topcoat
- Winter Grade Low Cure Epoxy is formulated to cure at lower temperatures.
For advice on which system is right for your project, talk to our technical team. We’ll ask the right questions before we make a recommendation.
-
SPEAK TO AN EXPERT
Get Started Today
At Black Country Paints, our highly experienced experts are on standby to answer any questions or provide additional information about our products. Call us today on 01902 954 944 or email at post@blackcountrypaints.co.uk.
Contact Us -
10,000+ Paints, mixed for order
Get Started Today
Find your perfect colour and we will mix it to order. View our full range of colours here and order paints to your exact specifications.
Shop Now
When To Use Two Pack Epoxy Paint
Understanding two pack epoxy paint is the key to using it correctly. Single-pack paints cure simply by solvent evaporation. A two-pack epoxy consists of a resin base and a hardener mixed immediately before application. This triggers a chemical reaction that creates a cross-linked, rigid film. That chemical cure is what gives epoxy its exceptional hardness, adhesion and resistance properties. It’s also why pot life matters.
Once mixed, a two-pack epoxy has a limited working window. Typically four to six hours depending on temperature, after which the material begins to gel and becomes unusable. Getting familiar with this before you start, rather than during application, saves a lot of wasted product.
Two-pack epoxy performs best in these conditions and applications:
- Heavy industrial floor traffic including forklifts and pallet trucks
- Chemical and fuel splash environments such as workshops and MOT bays
- Harsh marine environments exposed to saltwater, moisture and corrosive conditions
- Permanent water immersion such as pools and bilge coatings
- Structural steelwork requiring long-term corrosion protection
- Environments where a hard, seamless surface finish is required
- Production facilities where quick return to service is a priority
Explore our full epoxy range or contact us if you’d like guidance on mixing ratios and application methods for your specific product.
- Two Pack Epoxy Fibreglass Primer
- Two Pack Epoxy HB Line Marking Paint
- Two Pack Epoxy MIO (micaceous iron oxide) Primer
- Two Pack Epoxy Top Coat
- Two Pack Epoxy Zinc Phosphate Primer
- Two Pack Epoxy Zinc Rich Primer
Two Pack Epoxy Fibreglass Primer
Tin Sizes Available
1L, 2.5L, 5L
Two-Pack Epoxy Fibreglass Primer is a high-performance coating designed for priming fiberglass surfaces before applying paint or other protective coatings. It consists of two components: epoxy resin (base) and a hardener (activator), which must be mixed before application.
Two Pack Epoxy HB Line Marking Paint
Tin Sizes Available
1L, 2.5L, 5L
Two-Pack Epoxy HB (High-Build) Line Marking Paint is a heavy-duty, industrial-grade paint designed for creating durable, long-lasting markings on various surfaces. It consists of two components: epoxy resin (base) and a hardener (activator), which must be mixed before application.
Two Pack Epoxy MIO (micaceous iron oxide) Primer
Tin Sizes Available
5L
Two-Pack Epoxy MIO Primer is a high-performance, corrosion-resistant primer that contains micaceous iron oxide (MIO), which enhances durability and provides excellent protection against harsh environments. It consists of two components: epoxy resin (base) and a hardener (activator), which must be mixed before application.
Two Pack Epoxy Top Coat
Tin Sizes Available
1L, 2.5L, 5L
A Two-Pack Epoxy Top Coat is a high-performance, durable coating that consists of two components: epoxy resin (base) and a hardener (activator). It is designed to provide a tough, chemical-resistant, and abrasion-resistant finish on various surfaces, making it ideal for industrial, commercial, and heavy-duty applications.
Two Pack Epoxy Zinc Phosphate Primer
Tin Sizes Available
1L, 2.5L, 5L
A Two-Pack Epoxy Top Coat is a high-performance, durable coating that consists of two components: epoxy resin (base) and a hardener (activator). It is designed to provide a tough, chemical-resistant, and abrasion-resistant finish on various surfaces, making it ideal for industrial, commercial, and heavy-duty applications.
Two Pack Epoxy Zinc Rich Primer
Tin Sizes Available
5L
A Two-Pack Epoxy Zinc-Rich Primer is a high-performance anti-corrosion primer that contains high levels of zinc dust, providing cathodic protection to steel surfaces. This type of primer is widely used in industrial, marine, and structural applications where superior corrosion resistance is required. It consists of two components: an epoxy resin (base) and a hardener (activator), which must be mixed before application.
Epoxy Floor Paints Available at BC Paints
Industrial Epoxy Coatings for Demanding Environments
The reason industrial epoxy coatings dominate in demanding environments is straightforward. Nothing else in the same price bracket delivers the same combination of hardness, chemical resistance and adhesion to difficult substrates.
Once fully cured, a two-pack epoxy film is resistant to a wide range of acids, alkalis, oils and solvents. This is why it turns up everywhere from factory floors to pools to the inside of fuel storage tanks.
The trade-off is that epoxy requires more from the applicator than most coatings. Surface preparation has to be thorough. Mixing ratios have to be accurate. Application conditions need to be within spec. Cut corners on any of those and the performance drops sharply.
We put as much effort into the technical guidance we provide as we do into the formulation itself.
Environments where our industrial epoxy coatings are regularly specified:
- Warehouses and distribution centres with continuous heavy vehicle movement
- Water treatment plants and chemical storage facilities
- Marine structures and offshore equipment
- Concrete swimming pools, non-potable water tanks (not suitable for drinking water)
- Structural steel in bridges and industrial frameworks
Specifying an epoxy system for a challenging environment and want to get it right first time? Send us the details of your project and we’ll put together the correct coating specification.
Testimonials
Skip Manufacturer
We have used Black Country Paints for the last 6 years to supply all our paint requirements. Their product, service and reliability is top quality. We highly recommend them.
Industrial Racking Manufacturer
We have always had a great service from Black Country Paints. They deliver as promised and will always try to accommodate our various requirements. We order large quantities on a regular basis and have never had a problem with the consistency of materials and the colour matches.
Narrow Boat Paint
Just collected more paint for my narrow boat to touch up great paint - great price much cheaper than branded paints and just as good - staff very friendly
Fence Paint & Ironwork
We manufacture and Install estate fencing and a wide range of Architectural Ironwork throughout the UK, we are only as good as our last job and rely heavily on Black Country Paints to deliver the paint finish that we require. they manufacture a large range of quality paints that handle and apply well in a wide range of conditions (we love the English weather). We have used them exclusively for over 10 years. Great people to deal with, Excellent technical knowledge backed up with a great delivery service. Highly recommended.
Best Paint Supplier Around
Best paint supplier around. Top quality products, competitive pricing. Great service .
Exemplary Service
Previously purchased paint from Black Country Paints via Amazon but I recommend going to them direct. We needed more paint to finish a job with a deadline and one call to Adam and the (specialist) paint needed was mixed and shipped in time for next day delivery. Exemplary service. Will certainly be using again. Many thanks.
FAQS
Why does two-pack epoxy paint need to be mixed before use, and what happens if the ratio is wrong?
Two-pack epoxy relies on a precise chemical reaction between the resin and hardener to form a fully cured film. If the ratio is off, even slightly, the reaction is incomplete. This leaves a film that’s either too soft or prone to surface tackiness that never fully resolves.
Always weigh or measure both components accurately rather than estimating, and follow the manufacturer’s stated mix ratio exactly.
Can epoxy paint be applied over existing coatings, or does it always need bare substrate?
When applying epoxy paint over existing coatings, the result depends on what’s underneath.
Epoxy can bond well to existing sound coatings that are clean, degreased and lightly abraded, provided the underlying system is compatible. It will not adhere reliably to chalky, contaminated or poorly bonded surfaces.
For critical applications (floors, pool linings, structural steelwork) stripping to bare substrate and priming correctly gives a significantly better long-term result.
Can epoxy paint be applied over existing coatings, or does it always need bare substrate?
Epoxy is susceptible to UV degradation, which causes the surface to chalk and yellow with prolonged sunlight exposure. This is a known characteristic of epoxy chemistry rather than a product defect.
For exterior applications or anywhere the surface is exposed to direct sunlight, a polyurethane topcoat is recommended. When applied over the epoxy provides UV stability and preserves the finish and colour for far longer.
How long does two-pack epoxy take to fully cure, and when can the surface be put back into use?
Most two-pack epoxy coatings are touch dry within four to six hours and overcoatable within 12 to 24 hours. However, full chemical cure (where the coating reaches its maximum hardness and chemical resistance) takes seven days at 20°C.
For floor applications, light foot traffic is usually acceptable after 3-4 days. Heavy vehicles or chemical exposure should still wait for full cure.
Is solvent-free epoxy noticeably different to apply compared to solvent-based epoxy?
Yes, solvent-free epoxy has a much higher viscosity. This makes it harder to apply by brush or roller and requires more effort to achieve an even film build. It’s also more sensitive to temperature. Application below 15°C becomes difficult and above 25°C the pot life shortens considerably.
The advantage is that it produces minimal fumes. This means it is far more suitable for enclosed spaces, confined work areas or anywhere ventilation is limited.