Author Archives: BCP

Chlorinated Rubber Swimming Pool Paint

06 Jul 17
BCP
No Comments

bcp-cans

CHLORINATED RUBBER

SWIMMING POOL PAINT

 


Chlorinated Rubber Swimming Pool Paint is excellent for use where good chemical resistance is needed it is widely used on swimming pools & artificial ponds that are made from fiberglass brick or concrete.

Chlorinated Rubber Swimming Pool Paint coating that provides excellent elasticity so doesn’t crack when it is flexed and bent.


Key Facts

  • Two coats recommended for best results.
  • Touch Dry in 20-40 mintues.
  • Overcoat in 12-24 Hours.
  • Full Dry in 7 Days.
  • Suitable for Medium foot traffic.
  • Product exhibits a excellent chemical resistance.
  • Thinners if required T0200 Universal Thinners.
  • Coverage 8-10 squared metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
  • Application by suitable spray application, brush or roller
  • Suitable for concrete, metal and other suitably primed substrates.

Things to know

  • Mix paint well before use and check colour before use.
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
  • Temperature will affect drying times but will not prevent curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
  • If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.

 

Click Here To Buy It Online Now

Click Here Enquire Now

 

Delivery To

Delivery In

Product Sizes

Mainland UK 1-3 Days 1, 2.5, 5, 20, 25, 205 & 1000 Litres

Two Pack Epoxy Swimming Pool Paint

06 Jul 17
BCP
No Comments

bcp-cans

Two Pack Epoxy Swimming Pool Paint

 

 

 


Two Pack Epoxy Swimming Pool Paint Suitable for use on Concrete, Fiberglass, wood & metal where extreme durability and weathering is required.

Two Pack Epoxy Swimming Pool Paint is based on an epoxy resin that provides an excellent hard wearing coating once fully dry, with a mirror like gloss finish to Swimming Pools.


Key Facts

  • Two coats recommended for best results.
  • Minimum operational temperature is 10 degrees centigrade, paint will not cure below 10 deg c.
  • Mix catalyst in to paint very well for 3-4 minutes, a paddle on a slow running drill is recommended.
  •  Mixing ratio 4:1 (4 parts paint to 1 part catalyst).
  • Touch Dry in 2-4 Hours.
  •  Traffic after 2-3 days.
  • Overcoat in 12-24 Hours.
  • Full Dry in 7 Days. Suitable for heavy traffic (vehicles).
  • Product exhibits excellent chemical resistance with a high gloss finish.
  • Thinners if required T0200 Universal Thinners.
  • Coverage 8-10 square metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
  • Application by brush or roller
  • Suitable for concrete floors mild steel and other suitably primed substrates.

Things to know

  • Mix paint well before use and check colour before use.
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
  • Temperature will affect drying times and will prevent curing (below 10 deg c). We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
  • If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.

 

Click Here To Buy It Online Now

Click Here Enquire Now

 


Delivery To

Delivery In

Product Sizes

Mainland UK 1-3 Days 5L

Single Pack Fiberglass Primer

06 Jul 17
BCP
No Comments

bcp-cans

Single Pack Fiberglass Primer

 

 


Single Pack Fiberglass Primer is a compliant high build one pack primer offering enhanced anti-corrosive and fast drying properties to metal along with excellent etching properties to fiberglass and gelcoat.

Single Pack Fiberglass Primer is alkyd based and can be over coated with both one pack and two pack finishes.


Key Facts

  • Touch Dry in 20-30 Minutes
  •  Overcoat in 1-24 Hours
  • Full Dry in 7 Days
  • Thinners if required T1000 xylene thinners
  • Coverage 8-10 squared meters per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
  • Application by suitable spray application, brush or roller
  •  Suitable for metal other suitably primed substrates

Things to know

  • Mix paint well before use and check colour before use.
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
  • Temperature will affect drying times but will not prevent curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
  • Suitable for use on steel, wood, concrete, and other suitably prepared and primed substrates.
  • If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.

 

Click Here To Buy It Online Now

Click Here Enquire Now

 

Delivery To

Delivery In

Product Sizes

Mainland UK 1-3 Days 1- 1000 Litres