Chassis Paint based on a Polyurethane based resin which provides a tough film with good adhesion, gloss and weathering properties.
When fully dry the Chassis paint coating exhibits good resistance to petrol, paraffin and mineral oil spillage.
Semi-gloss & Matt can be used as one coat paints as they contain anti-corrosive products.
Chassis Paint is suitable for all vehicle chasssis for example military and landrover vehicles, agricultural, commercial vehicles and trailers.
- Touch Dry in 2-4 Hours
- Overcoat in 12-24 Hours
- Full Dry in 7 Days
- Thinners if required T0001 White Spirit
- Coverage 8-10 squared metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
- Application by suitable spray application, brush or roller
- Suitable for metal, wood, concrete and other suitably primed substrates
Things to know
- Mix paint well before use and check colour before use.
- Semi-Gloss and Matt finished can be used as a one coat finish to mild steel as they contain anti corrosive pigments.
- For the best anti-corrosion protection to metal use a primer first.
- Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
- When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
- Temperature will affect drying times but will not prevent curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
- Suitable for use on steel, wood, concrete, and other suitably prepared and primed substrates.
- If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.
|Mainland Uk||1-3 Days||1, 2.5, 5, 20, 25, 205 & 1000 Litres|