Blog Detail

Euroshield C A/C Matt Metal Primer (Compliant Metal Primer)

01 Nov 14
BC Paints Ltd
No Comments

bcp-cans


Eurosheild Anti-CorrosiveMatt

Compliant Metal Primer

 


Eurosheild Matt Compliant Metal Primer is based on a quick drying enamel resin, suitable for spray applications and brush application in small areas, to be used on mild steel as a one coat application no primer needed

Eurosheild Matt Compliant Metal Primer can be used in many different ways a few variations are metal paint, chassis paint, gates and railings paint, agricultural paint, crane and lifting gear paint, skip & container paint, structural steel, scaffold marking paint or stillage / pallet paints.


Key Facts

  • Touch Dry in 2o-30 Minutes.
  • Overcoat in 2-24 Hours.
  • Full Dry in 7 Days.
  • ·Use caution when over coating old paint as a reaction may occur if a white spirit coating has been applied previously.
  • Compliant coating for 15 tons of solvent a year and over (74% solids).
  • Wet film build of 600-800 microns
  • Thinners if required T1000 Xylene or T0200 Universal Thinners
  • Coverage 8-10 squared metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
  • Application by suitable spray application or by brush in small areas
  •  Suitable for metal and other suitably primed substrates

Things to know

  • Mix paint well before use and check colour before use.
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
  • Temperature will affect drying times but will not prevent curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
  • Suitable for use on steel, wood, concrete, and other suitably prepared and primed substrates.
  • If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.

 

 

Click Here Enquire Now

 

 

 


Deliver To

Delivery In

Product Sizes

Mainland UK 1-3 Days 1, 2.5, 5, 20, 25, 205 & 1000 Litres

 


Leave A Comment