Blog Detail

Aquaprime Water Based Industrial Metal Primer

01 Nov 14
BC Paints Ltd
No Comments

Aquaprime Steel Primer

Aquaprime Steel Primer


Aquaprime Waterbased Industrial Metal Primer

 

 


Aquaprime Water Based Industrial Metal Primer  Overview

Aquaprime Water Based Industrial Metal Primer is based on a quick drying water based resin, suitable for spray applications and brush or roller application in small areas, to be used on mild steel to provide ultra-high anticorrosive protection

Aquaprime Water Based Industrial Metal Primer can be used in many different ways a few variations are metal paint, chassis paint, gates and railings paint, agricultural paint, crane and lifting gear paint, skip & container paint, structural steel, castings, scaffold marking paint or stillage / pallet paints.

To ensure the best drying results Aquaprime requires air movement and heat. Please feel free to contact us for more information.


Key Facts

  • Touch Dry in 45-75 Minutes.
  • Over coat in 2-24 Hours.
  • Full Dry in 7 Days.
  • Compliant coating
  • Wet film build of 400 microns
  • Thinners if required water
  • Coverage 12-15 squared metres per litre, we cannot be held responsible for the method of application, absorption of substrate or wastage.
  • Application by suitable spray application or by brush in small areas
  • Suitable for metal and other suitably primed substrate

Things to know

  • Mix paint well before use and check colour before use.
  • Contains highly anti corrosive pigments.
  • Make sure substrates are suitably prepared (lightly abraded, degreased and or primed).
  • When applying to pre painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
  • Temperature will affect drying times and can prevent full curing. We recommend no less than 10 degrees centigrade to ensure no microscopic moisture build up on substrate. 25 degrees centigrade is the optimal temperature.
  • Suitable for use on steel, wood, concrete, and other suitably prepared and primed substrates.
  • If thinning is required 10% is recommended if brushing, additional thinners may be needed if spraying to achieve good atomisation of the product.

 

Click Here Enquire Now

 


  • Delivery To

    Delivery In

    Product Sizes

    Mainland UK 1-3 Days 5, 10, 205 & 1000L

     


Leave A Comment